ELEOK
標題: Wonderware FactorySuite A2 部署指南 簡體中文手冊 [打印本頁]
作者: guanp 時間: 2019-1-25 11:36
標題: Wonderware FactorySuite A2 部署指南 簡體中文手冊
FactorySuite A2? 部署指南 提供建議與 “最佳實踐”信息，以幫助在“Wonderware? FactorySuite A2 系統”環境中定義、設計及實施集成項目。
版權說明：本文檔由用戶提供并上傳，僅供個人學習用途，若內容存在侵權，請聯系我們刪除。
Wonderware系統平臺部署指南(中文).pdf
(2.67 MB, 售價: 3 E幣)
2019-1-25 11:36 上傳
點擊文件名下載附件
售價: 3 E幣
[記錄]
[
購買]
目錄
開始之前.............................................................11
關于本文檔 .................................................................................11
假設............................................................................................11
FactorySuite A2 應用程序版本............................................... 12
FactorySuite A2 術語 ............................................................. 13
文檔慣例.................................................................................... 14
查找附加信息的位置.................................................................. 14
ArchestrA 社區網站................................................................ 14
技術支持................................................................................. 14
第 1 章 : 規劃集成項目 .......................................17
FactorySuite A2 項目工作流程 .................................................. 18
FactorySuite A2 工作流程摘要............................................... 18
確定現場設備與功能要求 ....................................................... 18
定義對象命名慣例 .................................................................. 21
定義區域模型 ......................................................................... 22
規劃模板................................................................................. 23
定義安全性模型...................................................................... 26
定義部署模型 ......................................................................... 27
記錄規劃結果 ......................................................................... 28
第 2 章 : 確定拓撲結構要求 ................................29
拓撲結構組件分布 ..................................................................... 30
Galaxy 儲備庫 （配置數據庫）............................................... 31
AutomationObject 服務器節點 ............................................... 32
可視化節點............................................................................. 32
I/O 服務器節點 ....................................................................... 33
工程工作站節點...................................................................... 34
Historian 節點......................................................................... 35
SuiteVoyager Portal ............................................................... 35
拓撲結構類別............................................................................. 36
分布式本地網絡...................................................................... 36
客戶端 / 服務器....................................................................... 39
拓撲結構規劃的一般注意事項 ................................................... 40
舊有 InTouch 軟件應用程序.................................................... 43
終端服務................................................................................. 44
廣泛分布式網絡...................................................................... 49
拓撲結構配置的最佳實踐........................................................... 50
網絡配置................................................................................. 50
軟件配置 .................................................................................52
I/O 服務器連接 ...........................................................................53
I/O 與 DAServer：最佳實踐....................................................53
DIObject 的優勢......................................................................54
擴展 IAS 環境.............................................................................55
第 3 章 : 實施冗余...............................................59
冗余系統要求 .............................................................................60
AppEngine 冗余狀態...............................................................61
NIC 配置：冗余消息通道 (RMC)................................................61
主網絡連接..............................................................................62
RMC 網絡連接 ........................................................................62
冗余 DIObject.............................................................................63
配置.........................................................................................63
冗余配置組合 .............................................................................65
專用備份服務器 - 無冗余 I/O 服務器.......................................65
負載共享配置 ..........................................................................66
運行時注意事項.......................................................................71
部署注意事項 ..........................................................................72
腳本注意事項 ..........................................................................73
歷史.........................................................................................74
冗余配置中的報警 ......................................................................76
帶有專用可視化節點的冗余配置 .............................................77
無專用可視化客戶端節點的冗余對..........................................77
冗余 AppEngine 中的故障轉移原因 ...........................................78
強制故障轉移 ..........................................................................78
監管 （主）網絡中的通訊故障................................................78
RMC 通訊故障 ........................................................................81
PC 故障...................................................................................81
冗余系統檢查清單 ......................................................................83
關于大型系統中冗余的調整建議.................................................84
調整冗余引擎屬性...................................................................84
引擎監視 .................................................................................86
第 4 章 : 集成 FactorySuite 應用程序................89
IndustrialSQL Server Historian ..................................................90
ActiveFactory 軟件.....................................................................90
ActiveFactory 報告網站...........................................................90
InTouch HMI 軟件.......................................................................90
WindowMaker、 WindowViewer 及 View ...............................91
InTouch SmartSymbol.............................................................91
網絡使用率............................................................................. 92
InTouch 軟件插件................................................................... 93
Tablet 與 Panel PC................................................................. 93
SCADAlarm Event Notification 軟件.......................................... 94
Alarm DB Manager.................................................................... 94
SuiteVoyager 軟件..................................................................... 95
QI Analyst 軟件 ......................................................................... 95
DT Analyst 軟件 ........................................................................ 96
InTrack 軟件 .............................................................................. 96
將 InTrack 軟件與 Application Server 結合使用 ..................... 97
InTrack 軟件與其它 FactorySuite 軟件集成............................ 98
InBatch 軟件.............................................................................. 99
InBatch 生產系統要求 .......................................................... 100
InBatch 生產系統拓撲結構................................................... 101
第三方應用程序集成................................................................ 102
FactorySuite 網關................................................................. 102
其它連接 / 集成工具 ............................................................. 102
第 5 章 : 使用模板.............................................105
創建模板之前........................................................................... 106
創建模板模型........................................................................... 106
Containment （包含）與 UDA ............................................. 107
基本模板功能摘要 ................................................................ 108
模板建模示例 ........................................................................110
使用 UDA 與擴展......................................................................112
衍生模板與實例 ........................................................................113
在不同 Galaxy 中復用模板 .......................................................114
導出 / 導入模板與實例 ..............................................................115
導出自動化對象.....................................................................115
Galaxy 轉儲...........................................................................115
模板級別的腳本功能.................................................................117
腳本執行類型 ........................................................................118
設置變量范圍 ........................................................................118
OLE 與 / 或 COM 對象的腳本功能 ........................................119
使用別名................................................................................119
確定對象與腳本執行順序 ..................................................... 120
異步腳本............................................................................... 122
I/O 引用的腳本功能.............................................................. 122
寫入數據庫........................................................................... 123
第 6 章 : 實施 QuickScript .NET .....................125
IAS 腳本架構............................................................................126
ApplicationObject 腳本交互 ..................................................128
使用腳本訪問 IAS 對象屬性 .....................................................129
引用對象屬性與特性值..........................................................129
其它腳本函數類別.................................................................130
使用 UDA..............................................................................133
對象間與對象內腳本注意事項...............................................133
InTouch 到 ArchestrA 的演變 ...................................................134
對象間腳本交互.....................................................................134
對象內腳本交互.....................................................................134
遠程引用實時數據.................................................................134
間接引用 ...............................................................................134
IAS 環境................................................................................135
訪問 .NET Framework..............................................................135
.NET 概述 .............................................................................135
System.Data 類 （通過 ADO.NET 連接至 MSSQL）............136
腳本實踐 ...............................................................................136
使用 .NET 訪問數據庫..............................................................137
確定項目范圍與要求 .............................................................138
使用 "Shape" 模板對象 .........................................................138
使用 ObjectCacheExt （函數庫）..........................................139
發送數據 ...............................................................................140
對象函數封裝 ........................................................................140
腳本數據庫訪問........................................................................141
ObjectCacheExt.DLL 概述....................................................142
ObjectCacheExt.DLL 用途....................................................144
模板對象示例 ...........................................................................145
借助 UDA 的對象交互示例....................................................145
$SqlConnCacheMgr 腳本示例..............................................148
$PostToDBaORb 模板對象...................................................160
衍生自 $PostToDBaORb 的 $PostTOaORb .........................172
基于時間的計算與保留值 ......................................................173
記錄類...................................................................................180
摘要.......................................................................................180
第 7 章 : 構建安全性.........................................181
Wonderware 安全性視角..........................................................182
公共控制系統安全性注意事項...............................................183
公共安全性評估主題 .............................................................183
關于安全性基礎結構組件 ......................................................185
保護 FactorySuite A2 系統.......................................................188
安全性注意事項.................................................................... 188
公司網絡基礎結構層............................................................. 190
過程控制網絡 (PCN) 層........................................................ 190
保護可視化 .............................................................................. 192
基于 OS 組的安全模式備注.................................................. 193
保護配置環境........................................................................... 194
分布式 COM (DCOM).............................................................. 194
限制 DCOM 端口范圍 .......................................................... 194
安全性建議摘要 ....................................................................... 195
第 8 章 : 將數據作為歷史記錄存儲 ...................197
常規注意事項........................................................................... 198
數據點吞吐量 ....................................................................... 198
數據存儲速率 ....................................................................... 198
防止數據丟失 ....................................................................... 199
區域與數據存儲的重新分配 ..................................................... 199
非 Historian 數據存儲注意事項................................................ 200
第 9 章 : 實施報警與事件..................................201
總則......................................................................................... 202
配置報警查詢........................................................................... 202
確定報警拓撲結構 ................................................................... 203
分布式本地網絡拓撲結構中的報警....................................... 203
客戶端 / 服務器拓撲結構中的報警........................................ 204
記錄歷史報警........................................................................... 205
第 10 章 : 評估系統大小與性能.........................207
系統磁盤空間與 RAM 使用...................................................... 208
Galaxy 儲備庫性能注意事項 ................................................ 208
配置時預測磁盤空間與 RAM 需求........................................ 210
預測運行時磁盤空間與 RAM 需求........................................ 213
預測系統性能........................................................................... 214
單位應用程序定義 ................................................................ 214
硬件規格............................................................................... 216
基準服務器 CPU 值.............................................................. 216
性能數據.................................................................................. 217
單節點系統實施.................................................................... 220
大型分布式 FactorySuite A2 系統拓撲結構.......................... 223
超大型分布式 FactorySuite A2 系統拓撲結構 ...................... 225
故障轉移性能........................................................................... 228
專用備用配置 ........................................................................228
與遠程 I/O 數據源的負載共享...................................................230
DIObject 性能說明....................................................................232
OPC 客戶端性能 ......................................................................232
第 11 章 : 在廣域網和 SCADA 系統中工作 ......235
廣域網綜述...............................................................................236
網絡術語 ...............................................................................237
網絡與操作系統配置.................................................................237
最小帶寬需求 ........................................................................237
子網.......................................................................................237
DCOM...................................................................................237
域控制器 ...............................................................................238
遠程訪問服務 (RAS) .............................................................239
終端服務 ...............................................................................240
安全性 ......................................................................................240
域級安全性............................................................................240
工作組級安全性.....................................................................242
應用程序配置綜述 ....................................................................242
獲取并存儲事件數據的時間標簽 ...........................................242
獲取并存儲 RTU 事件信息....................................................242
災難恢復 ...............................................................................243
Industrial Application Server （分布式 IDE）........................243
平臺與引擎調整........................................................................245
調整 Historian Primitive/MDAS
（在 “平臺”與 “引擎”中）...............................................245
報警.......................................................................................246
節點間通訊............................................................................247
分布 InTouch HMI 節點 .........................................................249
使用 IndustrialSQL Server Historian .....................................250
診斷..........................................................................................250
SCADA 基準 ............................................................................251
MX 預訂網絡使用率 ..............................................................251
報警網絡使用率.....................................................................252
歷史網絡使用率.....................................................................253
摘要網絡使用率.....................................................................253
部署時的網絡使用率 .............................................................254
第 12 章 : 維護系統...........................................255
FactorySuite A2 系統診斷 / 維護工具.......................................256
Object Viewer （對象查看器）..............................................256
系統管理控制臺 (SMC) ........................................................ 257
附加診斷 / 維護工具................................................................. 258
Galaxy 診斷工具 .................................................................. 258
Galaxy 維護工具 .................................................................. 259
OS 診斷工具............................................................................ 260
性能監視器........................................................................... 260
事件查看器........................................................................... 260
附錄 A: 系統集成商檢查清單............................261
常規......................................................................................... 262
使用時間同步 ....................................................................... 262
禁用超線程........................................................................... 262
通訊......................................................................................... 262
配置 IP 地址 ......................................................................... 262
配置雙 NIC ........................................................................... 263
安全性 ..................................................................................... 263
確認用戶名與口令 ................................................................ 263
配置防病毒軟件.................................................................... 263
管理 （本地與遠程）................................................................ 264
安裝正確的 IAS 組件............................................................ 264
遠程 IDE 的連接要求
（從客戶端機器到 Galaxy）.................................................. 264
冗余配置.................................................................................. 264
冗余 AppEngine ................................................................... 264
多個 NIC............................................................................... 264
遷移......................................................................................... 265
確認版本與補丁.................................................................... 265
正確升級............................................................................... 265
兼容性 ..................................................................................... 265
FactorySuite 組件版本兼容性............................................... 265
附錄 B: .NET 源代碼示例 .................................267
SqlConnCacheMgr 對象.......................................................... 268
SqlConnCacheMgr 綜述 ...................................................... 268
SqlConnCacheMgr 配置 ...................................................... 269
PostTOaORb 對象................................................................... 292
PostTOaORb 綜述 ............................................................... 292
模板對象：$PostTOaORb.................................................... 300
RunTime 對象.......................................................................... 316
RunTime 綜述 ...................................................................... 316
RunTime 運行時行為............................................................ 317
RunTime 配置 .......................................................................318
模板對象：$RunTime ...........................................................320
$RunTime - Start...................................................................323
ObjectCache.dll Visual Studio.NET C# 解決方案.....................325
調試項目 ...............................................................................326
ObjectCacheExt.DLL 源代碼 ................................................328
索引 ..................................................................363
| 歡迎光臨 ELEOK (http://m.afoofa.cn/) |
Powered by Discuz! X5.0 |