下載解壓后有2個重要文件44.img(keycode軟盤鏡像)和CENTUM_CS3000_R3_09_00.nrg(安裝光盤鏡像)How to install :1. Insert Softwrae Medium cdrom(用支持nrg格式的虛擬光驅軟件掛載CENTUM_CS3000_R3_09_00.nrg在電腦里會生成一個虛擬的光驅).2. Insert Cd keycode to drive A or flopy driver(用虛擬軟驅軟件[壓縮包解壓后vfd21-050404目錄里]掛載44.img在電腦里會生成一個虛擬軟驅,如果使用vmware可以在vmware里添加一個虛擬軟驅硬件)Virtual Floppy Drive(VFD)虛擬軟驅使用教程http://m.afoofa.cn/thread-118927-1-1.html
![]()
![]()
![]()
3. Run setup at Software medium cdrom.(打開電腦的虛擬光驅運行setup這個程序)
4. Follow the instruction, If ask ID.. just open cd key file"Revision.KCD" with notepad and you can find where the ID.. Very Happy(安裝提示用keycode media選擇是,接下來讓你選擇keycode路徑,就是你電腦的掛載的44.img虛擬軟驅盤符,接下來安裝界面提示你輸入ID number,這個打開你掛載的虛擬軟驅,里面找到Revision.KCD這個文件用記事本等文本編輯器打開復制第三行字符就是ID number)。![]()
![]()
5. At installation proccess, program will ask for "Do you have the additional keycode medium?If yes,insert it." or next "Software medium". just select "No" option.當出現提示以下圖片所示的安裝下面圖片上面”紅箭頭“所指的選擇![]()
![]()
![]()
安裝中ing~~~~~~~~~~~
6. After finish do not select operator keyboard and com port just skip it.(不要選擇operator keyboard 和Port No)
![]()
7. Installation finish, and restart.How to use Simulation:1.After PC restrat, you can see small icon intray ( you will find it)2.Select "Start--> Program-->Yokogawa Centum-->System View"
3.Program opened and dialog box appear that you do not have Project .4.Select yes to create project and follow the instruction..( read manual for creation project, FCS and HIS)5. After project has created, you can beginning run simulation..![]()
| 歡迎光臨 ELEOK (http://m.afoofa.cn/) | Powered by Discuz! X5.0 |