The following software must be installed on your computer or programming device:
● SIMATIC STEP 7-Micro/WIN V4.0 SP6 (or later)
● SIMATIC STEP 7 Basic V10.5 SP2
● SIMATIC S7-200 to SIMATIC S7-1200 software conversion tool
The STEP 7-Micro/WIN program that you want to convert must have these properties:
● The program must have been created using STEP 7-Micro/WIN V4.0 SP7 or an earlier version of STEP 7-Micro/WIN.
● The program must have been created using SIMATIC programming mode. IEC programming mode is not supported.
● The program must have been saved in LAD (ladder editor) format.
● The program must compile with no errors.
● All user-defined password block protection must have been removed from the STEP 7-Micro/WIN program. Remove the password protection from the main routine, subroutines, interrupt routines, and all data pages in the data block. Any program block that is password protected will not be converted.
下載地址 http://www.99res.com/archives/308820.html
【必讀】版權免責聲明
1、本主題所有言論和內容純屬會員個人意見，與本論壇立場無關。2、本站對所發內容真實性、客觀性、可用性不做任何保證也不負任何責任，網友之間僅出于學習目的進行交流。3、對提供的數字內容不擁有任何權利，其版權歸原著者擁有。請勿將該數字內容進行商業交易、轉載等行為，該內容只為學習所提供，使用后發生的一切問題與本站無關。 4、本網站不保證本站提供的下載資源的準確性、安全性和完整性;同時本網站也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的損失或傷害。 5、本網站所有軟件和資料均為網友推薦收集整理而來，僅供學習用途使用，請務必下載后兩小時內刪除，禁止商用。6、如有侵犯你版權的，請及時聯系我們（電子郵箱1370723259@qq.com）指出，本站將立即改正。
|
