Proficy Process Systems 3.00 + Engineering Workstation 9.00

下載地址：若需要下載可以回帖索取
Important: To use Engineering Workstation on Windows 7, you must be part of the Administrators group. For more cautions and limitations when using Engineering Workstation on Windows 7, select Engineering Workstation in the Product field above, and click the Release Notes tab.

The table below is an overview of the operating systems that each Proficy Process Systems product is supported on.

Notes

Some components of the Proficy Process Systems products may not be supported on some operating systems. For detailed information, refer to the product's installation guide.

As a system, Proficy Process Systems no longer supports the following operating systems. Individual components of Proficy Process Systems may still support them:

Windows XP

Windows Vista

Windows 2000. This includes the Windows 2000 Advanced Server.

Windows 2003.

Install full version of .Net Framework 1.1, 3.5 SP1, 4.0, and 4.5; and windows installer 4.5 on Windows operating systems.

Enable .Net Framework v3.5 SP1 and Desktop Experience in the Server-Manager features list on Windows 2008.

Engineering Workstation
GE IP Controllers: PACSystems RX7i and PACSystems RX3i (firmware version 6.00 and later)

One USB port for licensing

Operator Console
GE IP Controllers: PACSystems RX3i and PACSystems RX7i (firmware version 6.50 and later)

One USB port for licensing

For Operator Console with Proficy HMI/SCADA iFIX, see the hardware requirements in the Important Product Information for iFIX.

For Operator Console with Proficy HMI/SCADA CIMPLICITY, see the hardware requirements in the Important Product Information for CIMPLICITY.

Application Server
For the Application Server with Proficy HMI/SCADA iFIX, see the hardware requirements in the Important Product Information for iFIX.

For the Application Server with Proficy HMI/SCADA CIMPLICITY, see the hardware requirements in the Important Product Information for CIMPLICITY.

System Server
GE IP Controllers: PACSystems RX7i and PACSystems RX3i (firmware version 6.50 and later)

【必讀】版權免責聲明

1、本主題所有言論和內容純屬會員個人意見，與本論壇立場無關。2、本站對所發內容真實性、客觀性、可用性不做任何保證也不負任何責任，網友之間僅出于學習目的進行交流。3、對提供的數字內容不擁有任何權利，其版權歸原著者擁有。請勿將該數字內容進行商業交易、轉載等行為，該內容只為學習所提供，使用后發生的一切問題與本站無關。 4、本網站不保證本站提供的下載資源的準確性、安全性和完整性;同時本網站也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的損失或傷害。 5、本網站所有軟件和資料均為網友推薦收集整理而來，僅供學習用途使用，請務必下載后兩小時內刪除，禁止商用。6、如有侵犯你版權的，請及時聯系我們（電子郵箱1370723259@qq.com）指出，本站將立即改正。