The STARTER is the commissioning tool for all SINAMICS and MICROMASTER drives.The firmware versions of the drive units are an integral part of the STARTER, or are installed via additive SINAMICS Support Packages (abbr. SSP) as an addition to the STARTER.
下載鏈接：
百度網盤下載鏈接.txt
(754 Bytes, 售價: 10 E幣)
2023-9-20 10:21 上傳
點擊文件名下載附件
售價: 10 E幣 [記錄]
[ 購買]
注意：請確保您所用的網絡可以訪問百度網盤并能熟練使用百度網盤下載文件，若附件內下載鏈接失效不能下載，可以回復本文留下郵箱給您發送可用鏈接。
1.png (97.84 KB)
下載附件
2019-11-18 00:34 上傳
The following minimum requirements have to be observed in case of STARTER and DCC without existing STEP 7 installation:
? Microsoft Internet Explorer V6.0 or higher
64-Bit Operating Systems:
? Microsoft Windows 7 Professional SP1
? Microsoft Windows 7 Ultimate SP1
? Microsoft Windows 7 Enterprise SP1 (Standard Installation)
? Microsoft Windows 10 Pro, Version 1607
? Microsoft Windows 10 Enterprise, Version 1607
? Microsoft Windows 10 Enterprise 2016 LTSB (OS Build 14393)
? Microsoft Windows Server 2008 R2 SP1
? Microsoft Windows Server 2016
STARTER V5.1 SP1 HF2 has been released for the following drive units:
New units or firmware versions added by this version are highlighted in bold.
? MICROMASTER 4. Generation (MM420 V1.30, MM440 V2.20, MM430 V2.20)
? SINAMICS DCM with firmware V1.1, V1.2, V1.3, V1.4, V1.4.1
? SINAMICS DCP with firmware V1.1, V1.2
? SIMATIC ET 200S FC with firmware V1.0.x, V3.0.x
? SIMATIC ET 200pro FC with firmware V3.0.x, V3.1.x
? SIMATIC ET 200pro FC-2 with firmware V4.7.3, V4.7.6 and (with SSP) V4.7.9
? SINAMICS G110 with firmware V1.0.x, V1.1.x, 1.2.x
? SINAMICS G110D with firmware V3.3.x, V3.4.x, V3.6.x, V3.7.x
? SINAMICS G110M with firmware V4.6, V4.7, V4.7.3, v4.7.6 and (with SSP) V4.7.9
? SINAMICS G120
o with firmware V2.0.x, V2.1.x, V3.0.x, V3.1.x, V3.2.x
o with firmware V4.2, V4.3.0, V4.3.2, V4.4, V4.5, V4.6, V4.7, V4.7.3, V4.7.6
and (with SSP) V4.7.9
? SINAMICS G120C
o with firmware V4.4, V4.5, V4.6, V4.7, V4.7.3, V4.7.6 and (with SSP) V4.7.9
? SINAMICS G120D
o with firmware V3.0.x, V3.1.x, V3.2.x, V4.5, V4.6, V4.7, V4.7.3, V4.7.6
and (with SSP) V4.7.9
? SINAMICS G120P
o with firmware V4.2, V4.3.0, V4.3.2, V4.4, V4.5, V4.6, V4.7, V4.7.3, V4.7.6
and (with SSP) V4.7.9
? SINAMICS G120P BT
o with firmware V4.4.1, V4.6, V4.7, V4.7.3, V4.7.6 and (with SSP) V4.7.9
? SINAMICS G130
o with firmware V2.1.x, V2.2.x, V2.3.x, V2.4.x, V2.5.1, V2.6.1 and V2.6.2
o with firmware V4.3.1, V4.3.2, V4.4, V4.5, V4.6, V4.7, V4.8 and (with SSP) V5.1
? SINAMICS G150
o with firmware V2.1.x, V2.2.x, V2.3.x, V2.4.x, V2.5.1, V2.6.1 and V2.6.2
o with firmware V4.3.1, V4.3.2, V4.4, V4.5, V4.6, V4.7, V4.8 and (with SSP) V5.1
? SINAMICS GM150
o with firmware V2.5.1, V2.6.1, V2.6.2, V4.3.1, V4.4.2, V4.5 (please see SINAMICS MV)
? SINAMICS GL150
o with firmware V2.5.1, V2.6.1, V2.6.2, V4.3.1, V4.4.2, V4.5 (please see SINAMICS MV)
? SINAMICS S110
o with firmware V4.1, V4.3.1, V4.3.2, V4.4, V4.4.3
? SINAMICS S120
o with firmware V2.1.x, V2.2.x, V2.3.x, V2.4.x, V2.5.1, V2.6.1, V2.6.2
o with firmware V4.3.1, V4.3.2, V4.4, V4.5, V4.6, V4.7, V4.8 and (with SSP) V5.1
? SINAMICS S150
o with firmware V2.1.x, V2.2.x, V2.3.x, V2.4.x, V2.5.1, V2.6.1, V2.6.2
o with firmware V4.3.1, V4.3.2, V4.4, V4.5, V4.6, V4.7, V4.8 and (with SSP) V5.1
? SINAMICS SL150
o with firmware V4.3.1, V4.4.2, V4.5 (please see SINAMICS MV)
? SINAMICS SM120
o with firmware V4.4.2 (please see SINAMICS MV)
? SINAMICS MV (GM150/GL150/SL150/SM120)
o with firmware V4.6, V4.7, V4.7.4, V4.7.5, V4.7.7
【必讀】版權免責聲明
1、本主題所有言論和內容純屬會員個人意見，與本論壇立場無關。2、本站對所發內容真實性、客觀性、可用性不做任何保證也不負任何責任，網友之間僅出于學習目的進行交流。3、對提供的數字內容不擁有任何權利，其版權歸原著者擁有。請勿將該數字內容進行商業交易、轉載等行為，該內容只為學習所提供，使用后發生的一切問題與本站無關。 4、本網站不保證本站提供的下載資源的準確性、安全性和完整性;同時本網站也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的損失或傷害。 5、本網站所有軟件和資料均為網友推薦收集整理而來，僅供學習用途使用，請務必下載后兩小時內刪除，禁止商用。6、如有侵犯你版權的，請及時聯系我們（電子郵箱1370723259@qq.com）指出，本站將立即改正。
|
