NJ/NX-series Startup Guide for Sysmac Library Adept Robot Control Library

版權說明：本文檔由用戶提供并上傳，僅供個人學習用途，若內容存在侵權，請聯系我們刪除。

Startup Guide for Sysmac Library Adept Robot Control Library .pdf (2.07 MB, 售價: 5 E幣)

2023-4-25 00:51 上傳

點擊文件名下載附件
售價: 5 E幣  [記錄]  [購買]

The Startup Guide for Adept Robot Control Library (hereinafter, may be referred to as the Guide) describes the procedures to launch the Adept robot control library (hereinafter, may be referred to as the function blocks), which controls Robot controllers from NJ/NX-series devices when Robot controllers manufactured by Omron Adept Technologies, Inc. are used in combination with an NJ/NX-series CPU Unit.You can perform the procedures that are presented in this Guide to quickly gain a basic understanding of the function blocks.This Guide contains the following references regarding the procedures to wire and set operation settings for the Robot controller and the robot, and the procedures to connect and set operation settings for the NJ/NX-series CPU Unit. Reference these and other related manuals as necessary.

This Guide covers the following products.? CPU Units of NJ/NX-series Machine Automation Controllers
? Sysmac Studio Automation Software
? SmartController EX, eAIB, and eMB Robot controllers
? Hornet series, Viper series, and Cobra series robots
? Automation Control Environment (ACE)

部分內容截圖：

【必讀】版權免責聲明

1、本主題所有言論和內容純屬會員個人意見，與本論壇立場無關。2、本站對所發內容真實性、客觀性、可用性不做任何保證也不負任何責任，網友之間僅出于學習目的進行交流。3、對提供的數字內容不擁有任何權利，其版權歸原著者擁有。請勿將該數字內容進行商業交易、轉載等行為，該內容只為學習所提供，使用后發生的一切問題與本站無關。 4、本網站不保證本站提供的下載資源的準確性、安全性和完整性;同時本網站也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的損失或傷害。 5、本網站所有軟件和資料均為網友推薦收集整理而來，僅供學習用途使用，請務必下載后兩小時內刪除，禁止商用。6、如有侵犯你版權的，請及時聯系我們（電子郵箱1370723259@qq.com）指出，本站將立即改正。

這個NX/NJ 文檔是中文版的？