OLED 0.97 STM8 STVD 菜單源碼

1. 
   
2. /* MAIN.C file
   
3. *
   
4. * Copyright (c) 2002-2005 STMicroelectronics
   
5. */
   
6. #include "stm8s105k4.h"
   
7.       
   
8. #define u8   unsigned char
   
9. #define u16  unsigned short
   
10. #define u32  unsigned long
    
11. #define uint unsigned int
    
12. /*--------------------引腳定義--------------------------*/
    
13. #define   OLED_SCLK_Set() (PB_ODR |= 0x01) //PB0（SCL）輸出高
    
14. #define   OLED_SCLK_Clr() (PB_ODR &= 0xfe) //PB0（SCL）輸出低
    
15. #define   OLED_SDIN_Set() (PB_ODR |= 0x02) //PB1（SDA）輸出高
    
16. #define   OLED_SDIN_Clr() (PB_ODR &= 0xfd) //PB1（SDA）輸出高
    
17. #define   OLED_READ_SDIN() (PB_IDR & 0x02)        //讀取PB4（SDA）電平  
    
18. 
    
19. //#define   OLED_KEY1()       (PD_IDR
    
20. /*definition--------------------------------------------*/
    
21. #define OLED_CMD  0 //寫命令
    
22. #define OLED_DATA 1 //寫數據
    
23. #define SIZE   16  //顯示字符的大小
    
24. #define Max_Column 128  //最大列數
    
25. #define Max_Row  64  //最大行數
    
26. #define X_WIDTH  128  //X軸的寬度
    
27. #define Y_WIDTH  64     //Y軸的寬度              
    
28. #define IIC_ACK  0  //應答
    
29. #define IIC_NO_ACK 1  //不應答
    
30. 
    
31. 
    
32. void OLED_GPIO_Init(void);
    
33. void delay (u8 num);
    
34. void delay_ms(uint ms);
    
35. void OLED_IIC_Start(void);
    
36. void OLED_IIC_Stop(void);
    
37. u8 IIC_Wait_Ack(void);
    
38. void Write_IIC_Byte(u8 IIC_Byte);
    
39. void Write_IIC_Command(u8 IIC_Command);
    
40. void Write_IIC_Data(u8 IIC_Data);
    
41. uint OLED_Pow(u8 m,u8 n);
    
42. void OLED_WR_Byte(u8 dat,u8 cmd);   //OLED寫字節函數
    
43. void OLED_Display_On(void); //開顯示函數
    
44. void OLED_Display_Off(void);//關顯示函數
    
45. void OLED_Init(void); //OLED初始化函數
    
46. void OLED_Clear(void);  //清屏函數
    
47. void OLED_ShowChar(u8 x,u8 y,u8 chr); //顯示字符函數
    
48. void OLED_ShowNum(u8 x,u8 y,uint num,u8 len,u8 size2); //在指定的位置，顯示一個指定數的長度大小函數
    
49. void OLED_ShowString(u8 x,u8 y, u8 *chr);  //在指定位置開始顯示字符串函數
    
50. void OLED_Set_Pos(u8 x, u8 y);  //畫點函數
    
51. void OLED_ShowChinese(u8 x,u8 y,u8 no); //聲明在指定位置顯示漢字函數
    
52. void OLED_DrawBMP(u8 x0, u8 y0,u8 x1, u8 y1,u8 BMP[]); //顯示圖片函數
    
53. void OLED_Scroll(void);//滾動函數
    
54. void OLED_menu(u8 cur);
    
55. void key_Init(void);
    
56.   u8 key1_scan(void);
    
57.   u8 key2_scan(void);
    
58. void KeyPressed(u8 cur);
    
59.   u8 key_scan(void);
    
60. const u8 table[]={2,4,6};
    
61. const u8 F6x8[][6];
    
62. const u8 F8X16[];
    
63. const u8 Hzk[][16];
    
64. //const u8 BMP1[];
    
65. 
    
66. main()
    
67. {
    
68. CLK_CKDIVR = 0x00;//f_HSI = f_HSI RC 輸出    f_CPU = f_MASTER    16M
    
69. OLED_Init();//OLED初始化
    
70. key_Init();
    
71.                 KeyPressed(1);
    
72. 
    
73. 
    
74. 
    
75.         while (1);
    
76.    
    
77. }
    
78. 
    
79. void delay(u8 num)
    
80. {
    
81. while(num--);
    
82. }
    
83. 
    
84. void delay_ms(uint ms)//延遲函數，MS級別
    
85. {
    
86. uint x,y;
    
87. for(x = ms;x>0;x--)
    
88. {
    
89.   for(y = 1300;y>0;y--);
    
90. }
    
91. }
    
92. 
    
93. void OLED_GPIO_Init(void)
    
94. {
    
95. PB_DDR |= 0x03; //將 PB0 PB1 口設為輸出
    
96. PB_CR1 &= 0xfc; //將 PB0 PB1 口設為開漏
    
97. PB_CR2 &= 0xfc;//將 PB0 PB1 口設為開漏
    
98. OLED_SCLK_Set(); //將PB4(SCL)設為高
    
99. OLED_SDIN_Set(); //將PB5(SDA)設為高
    
100. }
     
101. 
     
102. void OLED_IIC_Start(void)
     
103. {
     
104. OLED_SCLK_Set(); //時鐘線置高
     
105. OLED_SDIN_Set(); //信號線置高
     
106. delay(1); //延遲1us
     
107. OLED_SDIN_Clr(); //信號線置低
     
108. delay(1); //延遲1us
     
109. OLED_SCLK_Clr(); //時鐘線置低
     
110. delay(1); //延遲1us
     
111. }
     
112. 
     
113. void OLED_IIC_Stop(void)
     
114. {
     
115. OLED_SDIN_Clr(); //信號線置低
     
116. delay(1); //延遲1us
     
117. OLED_SCLK_Set(); //時鐘線置高
     
118. delay(1); //延遲1us
     
119. OLED_SDIN_Set(); //信號線置高
     
120. delay(1); //延遲1us
     
121. }
     
122. u8 IIC_Wait_Ack(void)
     
123. {
     
124. u8 ack;
     
125. OLED_SCLK_Clr(); //時鐘線置低
     
126. delay(1); //延遲1us
     
127. OLED_SDIN_Set(); //信號線置高
     
128. delay(1); //延遲1us
     
129. OLED_SCLK_Set(); //時鐘線置高
     
130. delay(1); //延遲1us
     
131. if(OLED_READ_SDIN()) //讀取SDA的電平
     
132.   ack = IIC_NO_ACK; //如果為1，則從機沒有應答
     
133. else
     
134.   ack = IIC_ACK;  //如果為0，則從機應答
     
135. OLED_SCLK_Clr();//時鐘線置低
     
136. delay(1); //延遲1us
     
137. return ack; //返回讀取到的應答信息
     
138. }
     
139. 
     
140. 
     
141. void Write_IIC_Byte(u8 IIC_Byte)
     
142. {
     
143. u8 i;  //定義變量
     
144. for(i=0;i<8;i++) //for循環8次
     
145. {
     
146.   OLED_SCLK_Clr(); //時鐘線置低，為傳輸數據做準備
     
147.   delay(1); //延遲1us
     
148.   if(IIC_Byte & 0x80) //讀取最高位
     
149.      OLED_SDIN_Set(); //最高位為1
     
150.   else
     
151.    OLED_SDIN_Clr(); //最高位為0
     
152.   IIC_Byte <<= 1;  //數據左移1位
     
153.   delay(1); //延遲1us
     
154.   OLED_SCLK_Set(); //時鐘線置高，產生上升沿，把數據發送出去
     
155.   delay(1); //延遲1us
     
156. }
     
157. OLED_SCLK_Clr(); //時鐘線置低
     
158. delay(1); //延遲1us
     
159. while(IIC_Wait_Ack()); //從機應答
     
160. }
     
161. 
     
162. 
     
163. void Write_IIC_Command(u8 IIC_Command)
     
164. {
     
165.    OLED_IIC_Start();
     
166.    Write_IIC_Byte(0x78);//寫入從機地址，SD0 = 0
     
167.    Write_IIC_Byte(0x00);//寫入命令
     
168.    Write_IIC_Byte(IIC_Command);//數據
     
169.    OLED_IIC_Stop();  //發送停止信號
     
170. }
     
171. 
     
172. void Write_IIC_Data(u8 IIC_Data)
     
173. {
     
174.    OLED_IIC_Start();
     
175.    Write_IIC_Byte(0x78); //寫入從機地址，SD0 = 0
     
176.    Write_IIC_Byte(0x40); //寫入數據
     
177.    Write_IIC_Byte(IIC_Data);//數據
     
178.    OLED_IIC_Stop();  //發送停止信號
     
179. }
     
180. 
     
181. void OLED_WR_Byte(u8 dat,u8 cmd)
     
182. {
     
183. if(cmd)
     
184.    {
     
185.        Write_IIC_Data(dat); //寫入數據
     
186.    }
     
187. else {
     
188.        Write_IIC_Command(dat); //寫入命令
     
189. }
     
190. }
     
191. 
     
192. void OLED_Set_Pos(u8 x,u8 y)
     
193. {
     
194. OLED_WR_Byte(0xb0+y,OLED_CMD);//寫入頁地址
     
195. OLED_WR_Byte((x&0x0f),OLED_CMD);  //寫入列的地址  低半字節
     
196. OLED_WR_Byte(((x&0xf0)>>4)|0x10,OLED_CMD);//寫入列的地址 高半字節
     
197. }      
     
198. 
     
199. void OLED_Display_On(void)
     
200. {
     
201. OLED_WR_Byte(0X8D,OLED_CMD);  //設置OLED電荷泵
     
202. OLED_WR_Byte(0X14,OLED_CMD);  //使能，開
     
203. OLED_WR_Byte(0XAF,OLED_CMD);  //開顯示
     
204. }
     
205. 
     
206. void OLED_Display_Off(void)
     
207. {
     
208. OLED_WR_Byte(0XAE,OLED_CMD);  //關顯示
     
209. OLED_WR_Byte(0X8D,OLED_CMD);  //設置OLED電荷泵
     
210. OLED_WR_Byte(0X10,OLED_CMD);  //失能，關
     
211. }         
     
212. 
     
213.    
     
214. void OLED_Clear(void)  
     
215. {  
     
216. u8 i,n;      //定義變量
     
217. for(i=0;i<8;i++)  
     
218. {  
     
219.   OLED_WR_Byte (0xb0+i,OLED_CMD);    //從0~7頁依次寫入
     
220.   OLED_WR_Byte (0x00,OLED_CMD);      //列低地址
     
221.   OLED_WR_Byte (0x10,OLED_CMD);      //列高地址  
     
222.   for(n=0;n<128;n++)OLED_WR_Byte(0,OLED_DATA); //寫入 0 清屏
     
223. }
     
224. }
     
225. 
     
226. void OLED_ShowChar(u8 x,u8 y,u8 chr)
     
227. {      
     
228. u8 c=0,i=0;
     
229.   c=chr-' '; //獲取字符的偏移量
     
230.   if(x>Max_Column-1){x=0;y=y+2;} //如果列數超出了范圍，就從下2頁的第0列開始
     
231.   if(SIZE ==16) //字符大小如果為 16 = 8*16
     
232.    {
     
233.     OLED_Set_Pos(x,y); //從x y 開始畫點
     
234.     for(i=0;i<8;i++)  //循環8次 占8列
     
235.     OLED_WR_Byte(F8X16[c*16+i],OLED_DATA); //找出字符 c 的數組位置，先在第一頁把列畫完
     
236.     OLED_Set_Pos(x,y+1); //頁數加1
     
237.     for(i=0;i<8;i++)  //循環8次
     
238.     OLED_WR_Byte(F8X16[c*16+i+8],OLED_DATA); //把第二頁的列數畫完
     
239.    }
     
240.   else  //字符大小為 6 = 6*8
     
241.    {
     
242.     OLED_Set_Pos(x,y+1); //一頁就可以畫完
     
243.     for(i=0;i<6;i++) //循環6次 ，占6列
     
244.     OLED_WR_Byte(F6x8[c][i],OLED_DATA); //把字符畫完
     
245.    }
     
246. }
     
247. 
     
248. uint OLED_Pow(u8 m,u8 n)
     
249. {
     
250. uint result=1;  
     
251. while(n--)result*=m;   
     
252. return result;
     
253. }      
     
254. 
     
255.    
     
256. void OLED_ShowNum(u8 x,u8 y,uint num,u8 len,u8 size)
     
257. {         
     
258. u8 t,temp;  //定義變量
     
259. u8 enshow=0;  //定義變量
     
260. for(t=0;t<len;t++)
     
261. {
     
262.   temp=(num/OLED_Pow(10,len-t-1))%10;//取出輸入數的每個位，由高到低
     
263.   if(enshow==0&&t<(len-1)) //enshow：是否為第一個數；t<(len-1)：判斷是否為最后一個數
     
264.   {
     
265.    if(temp==0) //如果該數為0
     
266.    {
     
267.     OLED_ShowChar(x+(size/2)*t,y,' ');//顯示 0 ；x+(size2/2)*t根據字體大小偏移的列數（8）
     
268.     continue; //跳過剩下語句，繼續重復循環（避免重復顯示）
     
269.    }else enshow=1;
     
270.   }
     
271.    OLED_ShowChar(x+(size/2)*t,y,temp+'0'); //顯示一個位；x+(size2/2)*t根據字體大小偏移的列數（8）
     
272. }
     
273. }
     
274. 
     
275. void OLED_ShowString(u8 x,u8 y,u8 *chr)
     
276. {
     
277. u8 j=0; //定義變量
     
278. while (chr[j]!='\0') //如果不是最后一個字符
     
279. {  
     
280.   OLED_ShowChar(x,y,chr[j]); //顯示字符
     
281.   x+=8; //列數加8 ，一個字符的列數占8
     
282.   if(x>=128){x=0;y+=2;} //如果x大于等于128，切換頁，從該頁的第一列顯示
     
283.   j++; //下一個字符
     
284. }
     
285. }
     
286. 
     
287. 
     
288. void OLED_ShowChinese(u8 x,u8 y,u8 no)
     
289. {            
     
290. u8 t; //定義變量
     
291. OLED_Set_Pos(x,y); //從 x y 開始畫點，先畫第一頁
     
292.     for(t=0;t<16;t++) //循環16次，畫第一頁的16列
     
293.   {
     
294.    OLED_WR_Byte(Hzk[no*2][t],OLED_DATA);//畫no在數組位2*no
     
295.       }
     
296.   OLED_Set_Pos(x,y+1); //畫第二頁
     
297.     for(t=0;t<16;t++)//循環16次，畫第二頁的16列
     
298.   {
     
299.    OLED_WR_Byte(Hzk[2*no+1][t],OLED_DATA);//畫no在數組位置的第二頁16列的點
     
300.         }     
     
301. }
     
302. 
     
303. void OLED_DrawBMP(u8 x0, u8 y0,u8 x1, u8 y1,u8 BMP[])
     
304. {  
     
305.   uint j=0; //定義變量
     
306.   u8 x,y; //定義變量
     
307.   
     
308.   if(y1%8==0) y=y1/8;   //判斷終止頁是否為8的整數倍
     
309.    else y=y1/8+1;
     
310.   for(y=y0;y<y1;y++) //從起始頁開始，畫到終止頁
     
311.   {
     
312.    OLED_Set_Pos(x0,y); //在頁的起始列開始畫
     
313.       for(x=x0;x<x1;x++) //畫x1 - x0 列
     
314.        {
     
315.         OLED_WR_Byte(BMP[j++],OLED_DATA); //畫圖片的點     
     
316.        }
     
317.   }
     
318. }
     
319. 
     
320.         
     
321. void OLED_Init(void)
     
322. {
     
323. OLED_GPIO_Init(); //GPIO口初始化
     
324. 
     
325. delay_ms(200); //延遲，由于單片機上電初始化比OLED快，所以必須加上延遲，等待OLED上復位完成
     
326. OLED_WR_Byte(0xAE,OLED_CMD); //關閉顯示
     
327. OLED_WR_Byte(0x00,OLED_CMD); //設置低列地址
     
328. OLED_WR_Byte(0x10,OLED_CMD); //設置高列地址
     
329. OLED_WR_Byte(0x40,OLED_CMD); //設置起始行地址
     
330. OLED_WR_Byte(0xB0,OLED_CMD); //設置頁地址
     
331. OLED_WR_Byte(0x81,OLED_CMD);  // 對比度設置，可設置亮度
     
332. OLED_WR_Byte(0xFF,OLED_CMD); //  265  
     
333. OLED_WR_Byte(0xA1,OLED_CMD); //設置段（SEG）的起始映射地址；column的127地址是SEG0的地址
     
334. OLED_WR_Byte(0xA6,OLED_CMD); //正常顯示；0xa7逆顯示
     
335. OLED_WR_Byte(0xA8,OLED_CMD); //設置驅動路數（16~64）
     
336. OLED_WR_Byte(0x3F,OLED_CMD); //64duty
     
337. 
     
338. OLED_WR_Byte(0xC8,OLED_CMD); //重映射模式，COM[N-1]~COM0掃描
     
339. OLED_WR_Byte(0xD3,OLED_CMD); //設置顯示偏移
     
340. OLED_WR_Byte(0x00,OLED_CMD); //無偏移
     
341. 
     
342. OLED_WR_Byte(0xD5,OLED_CMD); //設置震蕩器分頻
     
343. OLED_WR_Byte(0x80,OLED_CMD); //使用默認值
     
344. 
     
345. OLED_WR_Byte(0xD9,OLED_CMD); //設置 Pre-Charge Period
     
346. OLED_WR_Byte(0xF1,OLED_CMD); //使用官方推薦值
     
347. 
     
348. OLED_WR_Byte(0xDA,OLED_CMD); //設置 com pin configuartion
     
349. OLED_WR_Byte(0x12,OLED_CMD); //使用默認值
     
350. 
     
351. OLED_WR_Byte(0xDB,OLED_CMD); //設置 Vcomh，可調節亮度（默認）
     
352. OLED_WR_Byte(0x40,OLED_CMD); ////使用官方推薦值
     
353. 
     
354. OLED_WR_Byte(0x8D,OLED_CMD); //設置OLED電荷泵
     
355. OLED_WR_Byte(0x14,OLED_CMD); //開顯示
     
356. 
     
357. OLED_WR_Byte(0xAF,OLED_CMD); //開啟OLED面板顯示
     
358. OLED_Clear();        //清屏
     
359. OLED_Set_Pos(0,0);   //設置數據寫入的起始行、列
     
360. }  
     
361. 
     
362. void OLED_Scroll(void)
     
363. {
     
364. OLED_WR_Byte(0x2E,OLED_CMD); //關閉滾動
     
365. OLED_WR_Byte(0x27,OLED_CMD); //水平向左滾動
     
366. OLED_WR_Byte(0x00,OLED_CMD); //虛擬字節
     
367. OLED_WR_Byte(0x00,OLED_CMD); //起始頁 0
     
368. OLED_WR_Byte(0x00,OLED_CMD); //滾動時間間隔
     
369. OLED_WR_Byte(0x01,OLED_CMD); //終止頁 1
     
370. OLED_WR_Byte(0x00,OLED_CMD); //虛擬字節
     
371. OLED_WR_Byte(0xFF,OLED_CMD); //虛擬字節
     
372. OLED_WR_Byte(0x2F,OLED_CMD); //開啟滾動
     
373. }
     
374. 
     
375. 
     
376. const u8  F6x8[][6] =  
     
377. {
     
378. 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
     
379. 0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
     
380. 0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
     
381. 0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
     
382. 0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
     
383. 0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
     
384. 0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
     
385. 0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
     
386. 0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
     
387. 0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
     
388. 0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
     
389. 0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
     
390. 0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
     
391. 0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -
     
392. 0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
     
393. 0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
     
394. 0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
     
395. 0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
     
396. 0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
     
397. 0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
     
398. 0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
     
399. 0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
     
400. 0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
     
401. 0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
     
402. 0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
     
403. 0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
     
404. 0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
     
405. 0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
     
406. 0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
     
407. 0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
     
408. 0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
     
409. 0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
     
410. 0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
     
411. 0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
     
412. 0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
     
413. 0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
     
414. 0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
     
415. 0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
     
416. 0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
     
417. 0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
     
418. 0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
     
419. 0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
     
420. 0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
     
421. 0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
     
422. 0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
     
423. 0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
     
424. 0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
     
425. 0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
     
426. 0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
     
427. 0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
     
428. 0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
     
429. 0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
     
430. 0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
     
431. 0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
     
432. 0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
     
433. 0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
     
434. 0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
     
435. 0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
     
436. 0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
     
437. 0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
     
438. 0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
     
439. 0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
     
440. 0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
     
441. 0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
     
442. 0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
     
443. 0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
     
444. 0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
     
445. 0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
     
446. 0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
     
447. 0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
     
448. 0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
     
449. 0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
     
450. 0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
     
451. 0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
     
452. 0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
     
453. 0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
     
454. 0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
     
455. 0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
     
456. 0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
     
457. 0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
     
458. 0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
     
459. 0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
     
460. 0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
     
461. 0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
     
462. 0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
     
463. 0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
     
464. 0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
     
465. 0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
     
466. 0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
     
467. 0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
     
468. 0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
     
469. 0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
     
470. };
     
471. /****************************************8*16的點陣************************************/
     
472. const u8  F8X16[]=   
     
473. {
     
474.   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
     
475.   0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
     
476.   0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
     
477.   0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
     
478.   0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
     
479.   0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
     
480.   0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
     
481.   0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
     
482.   0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
     
483.   0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
     
484.   0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
     
485.   0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
     
486.   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
     
487.   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
     
488.   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
     
489.   0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
     
490.   0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
     
491.   0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
     
492.   0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
     
493.   0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
     
494.   0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
     
495.   0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
     
496.   0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
     
497.   0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
     
498.   0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
     
499.   0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
     
500.   0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
     
501.   0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
     
502.   0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
     
503.   0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
     
504.   0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
     
505.   0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
     
506.   0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
     
507.   0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
     
508.   0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
     
509.   0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
     
510.   0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
     
511.   0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
     
512.   0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
     
513.   0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
     
514.   0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
     
515.   0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
     
516.   0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
     
517.   0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
     
518.   0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
     
519.   0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
     
520.   0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
     
521.   0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
     
522.   0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
     
523.   0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
     
524.   0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
     
525.   0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
     
526.   0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
     
527.   0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
     
528.   0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
     
529.   0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
     
530.   0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
     
531.   0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
     
532.   0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
     
533.   0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
     
534.   0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
     
535.   0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
     
536.   0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
     
537.   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
     
538.   0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
     
539.   0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
     
540.   0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
     
541.   0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
     
542.   0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
     
543.   0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
     
544.   0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
     
545.   0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
     
546.   0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
     
547.   0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
     
548.   0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
     
549.   0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
     
550.   0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
     
551.   0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
     
552.   0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
     
553.   0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
     
554.   0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
     
555.   0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
     
556.   0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
     
557.   0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
     
558.   0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
     
559.   0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
     
560.   0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
     
561.   0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
     
562.   0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
     
563.   0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
     
564.   0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
     
565.   0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
     
566.   0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
     
567.   0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
     
568.   0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
     
569. };
     
570. const u8  Hzk[][16]={        
     
571. {0x04,0x04,0x44,0xC4,0x4F,0x44,0x44,0xC4,0x24,0x24,0x2F,0xB4,0x24,0x04,0x04,0x00},
     
572. {0x40,0x44,0x24,0x24,0x15,0x0C,0x04,0xFE,0x04,0x0C,0x15,0x24,0x24,0x44,0x40,0x00},/*"菜",0*/
     
573. {0x00,0x00,0xF8,0x49,0x4A,0x4C,0x48,0xF8,0x48,0x4C,0x4A,0x49,0xF8,0x00,0x00,0x00},
     
574. {0x10,0x10,0x13,0x12,0x12,0x12,0x12,0xFF,0x12,0x12,0x12,0x12,0x13,0x10,0x10,0x00},/*"單",1*/
     
575. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
     
576. {0x00,0x00,0x36,0x36,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"：",2*/
     
577. 
     
578. {0x10,0x10,0x10,0xFF,0x90,0x20,0x98,0x88,0x88,0xE9,0x8E,0x88,0x88,0xA8,0x98,0x00},
     
579. {0x02,0x42,0x81,0x7F,0x00,0x00,0x80,0x84,0x4B,0x28,0x10,0x28,0x47,0x80,0x00,0x00},/*"按",3*/
     
580. {0x40,0x30,0xEF,0x24,0x24,0x80,0xE4,0x9C,0x10,0x54,0x54,0xFF,0x54,0x7C,0x10,0x00},
     
581. {0x01,0x01,0x7F,0x21,0x51,0x26,0x18,0x27,0x44,0x45,0x45,0x5F,0x45,0x45,0x44,0x00},/*"鍵",4*/
     
582. {0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00},
     
583. {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"一",5*/
     
584. 
     
585. {0x10,0x10,0x10,0xFF,0x90,0x20,0x98,0x88,0x88,0xE9,0x8E,0x88,0x88,0xA8,0x98,0x00},
     
586. {0x02,0x42,0x81,0x7F,0x00,0x00,0x80,0x84,0x4B,0x28,0x10,0x28,0x47,0x80,0x00,0x00},/*"按",6*/
     
587. {0x40,0x30,0xEF,0x24,0x24,0x80,0xE4,0x9C,0x10,0x54,0x54,0xFF,0x54,0x7C,0x10,0x00},
     
588. {0x01,0x01,0x7F,0x21,0x51,0x26,0x18,0x27,0x44,0x45,0x45,0x5F,0x45,0x45,0x44,0x00},/*"鍵",7*/
     
589. {0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00,0x00},
     
590. {0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x00},/*"二",8*/
     
591. 
     
592. {0x04,0x34,0xC4,0x04,0xC4,0x3C,0x00,0x04,0xFC,0x04,0x04,0x04,0xC4,0x3C,0x00,0x00},
     
593. {0x40,0x30,0x0C,0x03,0x0C,0x30,0x80,0x40,0x20,0x13,0x0C,0x13,0x20,0x40,0x80,0x00},/*"雙",9*/
     
594. {0x10,0x10,0x10,0xFF,0x90,0x20,0x98,0x88,0x88,0xE9,0x8E,0x88,0x88,0xA8,0x98,0x00},
     
595. {0x02,0x42,0x81,0x7F,0x00,0x00,0x80,0x84,0x4B,0x28,0x10,0x28,0x47,0x80,0x00,0x00},/*"按",10*/
     
596. {0x40,0x30,0xEF,0x24,0x24,0x80,0xE4,0x9C,0x10,0x54,0x54,0xFF,0x54,0x7C,0x10,0x00},
     
597. {0x01,0x01,0x7F,0x21,0x51,0x26,0x18,0x27,0x44,0x45,0x45,0x5F,0x45,0x45,0x44,0x00},/*"鍵",11*/
     
598. };
     
599. void key_Init(void)
     
600. {
     
601.   PD_DDR&=0X00;
     
602.   PD_CR1=0X18;//PD3,PD4帶上拉的輸入模式
     
603.   PD_CR2&=0X00;
     
604. }
     
605. 
     
606. u8 key1_scan(void)           //PD3
     
607. {
     
608.              static u8 key1_up=0;
     
609.               u8 num;
     
610.               num=PD_IDR;
     
611.               num=PD_IDR&0x18;
     
612.               if(num==0x10)
     
613.                   delay_ms(30);
     
614.   if(num==0x10)
     
615.   {
     
616.           key1_up=0;
     
617.   }
     
618.   else
     
619. {
     
620.    key1_up=1;
     
621.    return 1;
     
622. }
     
623.      return 0;
     
624. }      
     
625.         
     
626.         
     
627. u8 key2_scan(void)           //PD4
     
628. {  
     
629.     static u8 key2_up=0;
     
630.     u8 num;
     
631.     num=PD_IDR;
     
632.     num=PD_IDR&0x18;
     
633.      if(num==0x08)
     
634.          delay_ms(30);
     
635.              if(num==0x08)
     
636. {
     
637.                      key2_up=0;
     
638.   }
     
639.   else
     
640. {
     
641.       key2_up=1;
     
642.       return 1;
     
643.                  }
     
644.      return 0;
     
645. }      
     
646. 
     
647. u8 key_scan(void)
     
648. {
     
649.   u8 key_code;
     
650.   if(key1_scan()==1)key_code=2;
     
651.   else if(key2_scan()==1)key_code=3;
     
652.   else key_code=0;
     
653.   return key_code;
     
654. }
     
655. 
     
656. void KeyPressed(u8 cur)
     
657. {
     
658.   u8 flag=0;
     
659. OLED_menu(cur);
     
660.       while(1)
     
661.                          {
     
662.   if(flag)
     
663.   {
     
664.    OLED_menu(cur);
     
665.    flag=2;
     
666.            }
     
667.   switch(key_scan())
     
668.   {
     
669.       case 0: flag = 0;
     
670.       break;
     
671.   
     
672.       
     
673.                      case 3: flag = 1;
     
674.                  if(cur==3)
     
675.                  cur=1;
     
676.                else
     
677.                                                cur++;
     
678.                 OLED_Clear();
     
679.                break;
     
680.   }
     
681.            }
     
682. }
     
683. void OLED_menu(u8 cur)
     
684.   {      
     
685.       void   OLED_String(u8 x,u8 y,u8 *chr);
     
686.       void   OLED_ShowChinese(u8 x,u8 y,u8  no);
     
687.        switch(cur)
     
688. {
     
689.       
     
690.         
     
691. case 1:  
     
692.                         OLED_ShowString(16,2,"=>");
     
693.                         OLED_ShowChinese(0,0,0);//OLED顯示      菜
     
694.                                        OLED_ShowChinese(16,0,1);//OLED顯示    單
     
695.                         OLED_ShowChinese(32,0,2);//OLED顯示     ：
     
696.                         OLED_ShowChinese(32,2,3);//OLED顯示    按
     
697.          OLED_ShowChinese(48,2,4);//OLED顯示    鍵
     
698.          OLED_ShowChinese(64,2,5);//OLED顯示    一
     
699.                         OLED_ShowChinese(32,4,6);//OLED顯示    按
     
700.          OLED_ShowChinese(48,4,7);//OLED顯示    鍵
     
701.                         OLED_ShowChinese(64,4,8);//OLED顯示    二
     
702.                         OLED_ShowChinese(32,6,9);//OLED顯示    雙
     
703.          OLED_ShowChinese(48,6,10);//OLED顯示  按
     
704.          OLED_ShowChinese(64,6,11);//OLED顯示  鍵               
     
705.                                        break;
     
706.             
     
707. case 2:
     
708.                  
     
709.                         OLED_ShowString(16,4,"=>");
     
710.                         OLED_ShowChinese(0,0,0);//OLED顯示     菜
     
711.                                        OLED_ShowChinese(16,0,1);//OLED顯示   單
     
712.                         OLED_ShowChinese(32,0,2);//OLED顯示    ：
     
713.                         OLED_ShowChinese(32,2,3);//OLED顯示   按
     
714.          OLED_ShowChinese(48,2,4);//OLED顯示   鍵
     
715.          OLED_ShowChinese(64,2,5);//OLED顯示   一
     
716.                         OLED_ShowChinese(32,4,6);//OLED顯示   按
     
717.          OLED_ShowChinese(48,4,7);//OLED顯示   鍵
     
718.                         OLED_ShowChinese(64,4,8);//OLED顯示   二
     
719.                         OLED_ShowChinese(32,6,9);//OLED顯示   雙
     
720.          OLED_ShowChinese(48,6,10);//OLED顯示 按
     
721.                                        OLED_ShowChinese(64,6,11);//OLED顯示 鍵
     
722.          break;
     
723.             
     
724.                  case 3:
     
725.                       OLED_ShowString(16,6,"=>");
     
726.                         OLED_ShowChinese(0,0,0);//OLED顯示          菜
     
727.                                        OLED_ShowChinese(16,0,1);//OLED顯示        單
     
728.                         OLED_ShowChinese(32,0,2);//OLED顯示         ：
     
729.                         OLED_ShowChinese(32,2,3);//OLED顯示        按
     
730.                         OLED_ShowChinese(48,2,4);//OLED顯示        鍵
     
731.                                        OLED_ShowChinese(64,2,5);//OLED顯示        一
     
732.                         OLED_ShowChinese(32,4,6);//OLED顯示        按
     
733.          OLED_ShowChinese(48,4,7);//OLED顯示        鍵
     
734.                         OLED_ShowChinese(64,4,8);//OLED顯示        二
     
735.                         OLED_ShowChinese(32,6,9);//OLED顯示        雙
     
736.          OLED_ShowChinese(48,6,10);//OLED顯示      按
     
737.          OLED_ShowChinese(64,6,11);//OLED顯示      鍵
     
738.                          break;     
     
739.             
     
740.    }
     
741.   }

復制代碼

【必讀】版權免責聲明

1、本主題所有言論和內容純屬會員個人意見，與本論壇立場無關。2、本站對所發內容真實性、客觀性、可用性不做任何保證也不負任何責任，網友之間僅出于學習目的進行交流。3、對提供的數字內容不擁有任何權利，其版權歸原著者擁有。請勿將該數字內容進行商業交易、轉載等行為，該內容只為學習所提供，使用后發生的一切問題與本站無關。 4、本網站不保證本站提供的下載資源的準確性、安全性和完整性;同時本網站也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的損失或傷害。 5、本網站所有軟件和資料均為網友推薦收集整理而來，僅供學習用途使用，請務必下載后兩小時內刪除，禁止商用。6、如有侵犯你版權的，請及時聯系我們（電子郵箱1370723259@qq.com）指出，本站將立即改正。