PacsAnalyzer V4.4 下載

程序下載： PacsAnalyzer Version 4.4.zip (13.12 MB, 售價: 10 E幣)

2024-3-8 16:18 上傳

點擊文件名下載附件
售價: 10 E幣  [記錄]  [購買]

PacsAnalyzer is the preferred tool used to collect PLC Module Information, Fault tables, and Station Manager Ethernet Data.
PacsAnalyzer is compatible with following CPUs:
? All PACs CPUs (RX3i and RX7i) and RX3i ENIU.
? RXi controller (ICRXICTL000)
? RSTi-EP Controller (EPSCPE100/115)
? Series 90-70 CPU's
? Series 90-30, including CPU374/372
? VersaMax modular PLC and Nano/Micro (Ethernet data collection not supported) Ethernet and Serial connections are supported. The default connection to the PLC will be over Ethernet, but if user chooses to connect serially instead, ONLY module info/fault tables will be collected. The station manager Ethernet data collection (ETM Analysis) will not be collected when the tool is executed over serial connection to the PLC CPU that supports serial connections.
Prerequisite:
--------------
Standalone application of PacsAnalyzer need Microsoft redistributable package(VC2013 redistributable).

Steps to install:
1. Redistributable package(VC 2013 Redistributable Package.rar) is provided with PacsAnalyzer.
2. Unzip the file (VC 2013 Redistributable Package.rar) and install the VC 2013 Redistributable(vcredist.exe) based on the OS version.

New Features
---------------
1.The CSV file shall be written to disk after each sample so that it may be viewed at any time to analyze samples to date and minimize the
chance of data loss in the event of an issue with the PC running PacsAnalyzer.
2.Saving of standard PACS Analyzer log before Trend begins.
3.Support added in command line options for Trend feature.  
4.User warning will be prompted if there is any existing Trend data is available before the Trend start.
5.Removed PcTime stamp after every command when you run a normal PacsAnalyzer.
6.Warning message will be prompted if scan is greater than duration when starting Trend.
7.Output File is made to configurable when Trend is checked as this field is in use.
8.Support of ‘Config.xml’ is added to the Trend feature in command line. Config file is supported with only one controller at a time.
9.Changed the minimum Scan rate value to 5 secs.
10.New Commands added to Trend from commandline.
/start     - Start trend (To start the trend - eg : /ip="10.10.0.50" /scan="5" /duration="5" /out="paclog.txt" /log="trend.csv" /start )
/stop      - Stop trend (For Individual IP Address - eg : /ip="10.10.0.50" /stop )
/stopall   - Stop all trends (To stop all running trends - eg : /stopall )
/livetrend - Show all the live trends (To display all the current running trends - eg: /livetrend)

【必讀】版權免責聲明

1、本主題所有言論和內容純屬會員個人意見，與本論壇立場無關。2、本站對所發內容真實性、客觀性、可用性不做任何保證也不負任何責任，網友之間僅出于學習目的進行交流。3、對提供的數字內容不擁有任何權利，其版權歸原著者擁有。請勿將該數字內容進行商業交易、轉載等行為，該內容只為學習所提供，使用后發生的一切問題與本站無關。 4、本網站不保證本站提供的下載資源的準確性、安全性和完整性;同時本網站也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的損失或傷害。 5、本網站所有軟件和資料均為網友推薦收集整理而來，僅供學習用途使用，請務必下載后兩小時內刪除，禁止商用。6、如有侵犯你版權的，請及時聯系我們（電子郵箱1370723259@qq.com）指出，本站將立即改正。