GE Fanuc Proficy Machine Edition 6.0 安裝文件下載

很老的軟件操作系統不支持64bit，僅支持以下操作系統
Development Environment Windows XP Professional Service Pack 2 or Service Pack 3, or Windows 2000 Professional Service Pack 4.
Windows Vista Enterprise, Windows Vista Enterprise SP1, Windows Vista Business, and Windows Vista Business SP1 are supported in the development environment of Logic Developer - PLC, Logic Developer - PC, View, and Change Management. They are not supported for Logic Developer - State, Motion Developer, and FANUC LADDER-IIIC.
Notes
To use Proficy Machine Edition (PME) in Windows Vista, a user must be part of the Administrators group. In Windows XP and Windows 2000, a PME user must be part of the PowerUsers group or the Administrators group.
Windows regional settings must be set to English.
Windows XP Tablet PC Edition and Windows XP Embedded are not supported.
Internet Explorer version 7.0, Internet Explorer version 6.0 Service Pack 1 or later, or Internet Explorer version 5.5 with Service Pack 2 Q810847 or later.
Note: You must install Internet Explorer before installing Machine Edition.
TCP/IP Network protocol-based computer (if you use an Ethernet connection).
Requirements for processor speed and memory are as follows:
Minimum: 1 GHz Pentium-based processor with 256 MB RAM
Recommended: 2 GHz Pentium-based processor with 512 MB RAM
Note: For projects with more than 75,000 variables or variable elements, at least 1 GB of RAM is strongly recommended.
.NET Framework 2.0. If the Microsoft .NET Framework is not yet installed, it is automatically included during installation of Machine Edition.
1 GB hard disk space. Additional space is required for your projects and temporary files.
The following is a summary of all runtime targets supported by each Proficy Machine Edition product. For more details, with the "Supported H/W" tab active, select the appropriate product in the Product list box at the top of the screen
Logic Developer - PC
Windows NT, 2000, XP
ControlStation CEII, CEIIx
QuickPanel Control
For a list of supported I/O equipment, see the Supported H/W section for Logic Developer - PC.
Proficy View
Windows NT, 2000, XP
ControlStation/ViewStation CEII, CEIIx
QuickPanel and QuickPanel Jr.
QuickPanel View/QuickPanel Control
For a list of supported I/O equipment, see the Supported H/W section for View.
Proficy Logic Developer - PLC
GE Fanuc controllers: PACSystems RX7i, PACSystems RX3i, Series 90-70, Series 90-30, VersaMax, VersaMax Nano/Micro, Series 90 Micro
GE Fanuc Remote I/O Adapters
For a list of supported GE Fanuc CPUs and remote I/O adapters, see the Supported H/W section for Logic Developer - PLC.
Proficy Motion
S2K, IMC, IMCjr (IMJ), and SMJ Motion Controllers
For a list of supported I/O equipment, see the Supported H/W section for Motion.
Proficy Logic Developer - State
GE Fanuc controllers: Series 90-70, Series 90-30
For a list of supported GE Fanuc CPUs, see the Supported H/W section for Logic Developer - State.
Fanuc Ladder IIIc
GE Fanuc CNC Controllers
For a list of supported controllers, see the Supported H/W section for Fanuc Ladder IIIc.
很古老的程序，支持操作系統Windows XP Professional Service Pack 2 or Service Pack 3, or Windows 2000 Professional Service Pack 4，其他操作系統兼容性未知，建議在虛擬機里安裝對應操作系統進行測試。
安裝文件下載鏈接:
百度網盤下載鏈接.txt (754 Bytes, 售價: 50 E幣)

2022-8-6 11:19 上傳

點擊文件名下載附件
售價: 50 E幣  [記錄]  [購買]

注意：請確保您所用的網絡可以訪問百度網盤并能熟練使用百度網盤下載文件，若附件內下載鏈接失效不能下載，可以回復本文留下郵箱給您發送可用鏈接。
Proficy Machine Edition 6.00 SIM 16 補丁包
http://m.afoofa.cn/thread-117178-1-1.html

【必讀】版權免責聲明

1、本主題所有言論和內容純屬會員個人意見，與本論壇立場無關。2、本站對所發內容真實性、客觀性、可用性不做任何保證也不負任何責任，網友之間僅出于學習目的進行交流。3、對提供的數字內容不擁有任何權利，其版權歸原著者擁有。請勿將該數字內容進行商業交易、轉載等行為，該內容只為學習所提供，使用后發生的一切問題與本站無關。 4、本網站不保證本站提供的下載資源的準確性、安全性和完整性;同時本網站也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的損失或傷害。 5、本網站所有軟件和資料均為網友推薦收集整理而來，僅供學習用途使用，請務必下載后兩小時內刪除，禁止商用。6、如有侵犯你版權的，請及時聯系我們（電子郵箱1370723259@qq.com）指出，本站將立即改正。