GE Fanuc Serial Communication Test Utility v0.91

GE Fanuc Serial Communication Test Utility v0.91.zip (92.86 KB, 售價: 10 E幣)

2019-5-2 17:14 上傳

點擊文件名下載附件
售價: 10 E幣  [記錄]  [購買]

GE Fanuc PLC Tech Support developed SerialCommTest to help our customers test GE Fanuc PLC serial communications. This program started as the DOS TestCOM program in 1996 to expand on the Logicmaster 90 LB program. It is now a 32-bit Windows program for compatibility with VersaPro and CIMPLICITY HMI programs.
With SerialCommTest, you can:

•        Tests connection to PLC using serial direct or multidrop with CPU ID
•        If connect fails, can automatically retry using all Data Rates and Parity
•        Select any COM port with warning displayed for IRQ or port conflicts
•        Loopback test identifies which COM port and checks RX->TX and RTS->CTS
•        Shows cables with signal pin-outs for 25 combinations of computer and PLC ports
•        Display memory available in 16-bit DOS box for Logicmaster programmers
•        Edit proper CONFIG and AUTOEXEC files based on operating system

•        Makes recommendations for system files and warns of missing files

This Help text is incomplete and is still being expanded. Check the Tech Support web site for updates. The modem setup is for PLC modmes only as the PLC dialer program is in the StartS90 program on the web site. In fact, SerialCommTest is just a sub-set of three dialog screens from the StartS90 program.

•        Setup PLC modems for SNP communications This part under development

【必讀】版權免責聲明

1、本主題所有言論和內容純屬會員個人意見，與本論壇立場無關。2、本站對所發內容真實性、客觀性、可用性不做任何保證也不負任何責任，網友之間僅出于學習目的進行交流。3、對提供的數字內容不擁有任何權利，其版權歸原著者擁有。請勿將該數字內容進行商業交易、轉載等行為，該內容只為學習所提供，使用后發生的一切問題與本站無關。 4、本網站不保證本站提供的下載資源的準確性、安全性和完整性;同時本網站也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的損失或傷害。 5、本網站所有軟件和資料均為網友推薦收集整理而來，僅供學習用途使用，請務必下載后兩小時內刪除，禁止商用。6、如有侵犯你版權的，請及時聯系我們（電子郵箱1370723259@qq.com）指出，本站將立即改正。