Omron CX-One Ver.4.51 多語言版本

CX-one 4.51版本增加對CP2E的支持。

Omron CX-One Ver.4.61 多語言版本含簡體中文
http://m.afoofa.cn/thread-123557-1-1.html

Modification notice of version upgrade (Ver.4.51) of

[Changes]

Before the change	After the change
[CX-One Version] Ver.4.50	[CX-One Version] Ver.4.51

[Changes]

Before the change

After the change

The functions on the right were not provided.

CX-Programmer Ver.9.73 [Support of New Type] *Supported the following new models. CP2E-E[][]DR-A, CP2E-S[][]D[]-[], CP2E-N[][]D[]-[] [Improved functions] *Changed the default PLC. When CX-One is installed: CJ1M-CPU11 => CJ2M-CPU11 When CX-One Lite is installed: CP1L-M => CP2E-S * Solved the problem that CX-Programmer terminated abnormally or became inoperable when a project with a long project name or a long PLC name was loaded. * Solved the problem that a fatal error occurred on the PLC after the project was downloaded, becauseDR0+,IR00 that was specified for instruction’s parameter was not detected in error check. * Solved the problem that timer/counter numbers were determined incorrectly as duplicated with CIO address when the CIO address was specified as automatic allocation area. * Solved the problem that an error might not be detected in program check even though input condition of the FB instance was not correct. * Solved the problem that CX-Programmer might terminate abnormally, when a program that included FB instance was uploaded from the PLC. *Solved the problem that the UM size displayed in the FB Memory view of CP1 might be incorrect when there is an FB definition and no FB instance. *Solved the problem that an error occurs in the program check for a program with the maximum display capacity in the Memory view, when interrupt tasks and FB definitions are used simultaneously in a PLC with an area for FB only. *Solved the problem that program errors cannot be detected if an array of variable type index is specified in the DIFU/DIFD instruction operands in the FB ladder. *Solved the problem that a fatal error might occur in the PLC if a structure BOOL type member is used for the IF statement condition for the FBST program in CJ2H/CJ2M. *Solved the problem that transferring CP1E programs to CX-Simulator might fail when the programs include interruption tasks. *Solved the problem that no error is detected in program check even when an array variable without address assignment is used in a ST program/ST action/ST transition. *Solved the problem in Ver.9.72 that arithmetic expressions cannot be used as the index of array variables in the ST program. *Solved the problem that data could not be transferred to the comment memory immediately after clearing all memory. CX-Simulator Ver.2.01 [Support of New Type] *Supported the following new models. CP2E-E[][]DR-A, CP2E-S[][]D[]-[], CP2E-N[][]D[]-[]

[Changes]

Before the change

After the change

The functions on the right were not provided.

CX-Integrator Ver.2.67 [Support of New Type] *Supported the following new models. CP2E-N[][]D[]-[] [Improved functions] *Solved the problem that CX-Integrator might terminate abnormally when device parameters of the EJ1N-HFUB-DRT are copied. CX-DriveVer.3.00 [Support of New Type] *Supported the new inverter 3G3RX2-series CX-Protocol Ver.2.01 [Improved functions] * Solved the problem that memory leak might occur when the project file could not be loaded. CX-Thermo Ver.4.69 [Support of New Type] * Supports E5DC Push-In type. Network Configurator Ver.3.68 [Support of New Type] *Supported the K6PM series Control Panel Monitoring Device. *Supported the FHV7 series Smart Camera. *Supported the V430-F series Auto Focus Multi Code Reader. CX-ConfiguratorFDT Ver.2.53 [Support of New Type] *Supported the E2E-NEXT (IO-Link embedded) series proximity sensors. NX-IO Configurator Ver.1.21 [Support of New Type] *Supported the simple setting function for IO-Link master (NX-ILM400). * Supported NX?series Temperature Control Unit (NX-TC) Ver1.2.

[Changes]

Before the change

After the change

The functions on the right were not provided.

Switch Box Utility Ver.1.70 [Support of New Type] *Supported the following new models. CP2E-E[][]DR-A, CP2E-S[][]D[]-[], CP2E-N[][]D[]-[]. Common Components of CX-One and Sysmac Studio [Support of New Type] *Supported the following new models. CP2E-E[][]DR-A, CP2E-S[][]D[]-[], CP2E-N[][]D[]-[]. * It is now possible to install IODD files (standard profile of IO-Link device) of Omron’s IO-Link devices. * It is now possible to install IODD files of Intelligent tap (accessory for F3SG-SR/PG series Safety Light Curtain) * It is now possible to install IODD files of Proximity sensors (E2EW series) [Improved functions] [PLC Tools] * Improved to prevent memory leak when the I/O table component terminates.

[Product Lineup]

Product Name	Model	Specifications
FA Integrated Tool Package CX-One Ver.4.51	CXONE-AL00D-V4	DVD Media only
	CXONE-AL01D-V4	DVD Media, 1 license
	CXONE-AL01D-V4-UP	DVD Media, 1 license (The upgrade versions)
	CXONE-AL03D-V4	DVD Media, 3 licenses
	CXONE-AL03D-V4-UP	DVD Media, 3 licenses (The upgrade versions)
	CXONE-AL10D-V4	DVD Media, 10 licenses
	CXONE-AL10D-V4-UP	DVD Media, 10 licenses (The upgrade versions)
	CXONE-AL30D-V4	DVD Media, 30 licenses
	CXONE-AL30D-V4-UP	DVD Media, 30 licenses (The upgrade versions)
	CXONE-AL50D-V4	DVD Media, 50 licenses
	CXONE-AL50D-V4-UP	DVD Media, 50 licenses (The upgrade versions)
	CXONE-ALXXD-V4	DVD Media, Site license
	CXONE-ALXXD-V4-UP	DVD Media, Site license (The upgrade versions)
FA Integrated Tool Package CX-One Lite Ver.4.51	CXONE-LT01D-V4	DVD Media, 1 license
	CXONE-LT01D-V4-UP	DVD Media, 1 license (The upgrade versions)

* CX-One Lite is a subset of the complete CX-One package that provides only the Support Software required for micro PLC applications.

Specifications in this product news are as of the issue date and are subject to change without notice. Only main changes in specifications are described in this document. Please be sure to read the relevant catalogs, datasheets, product specifications, instructions, and manuals for precautions and necessary information when using products.

                                                                                                                                             

【必讀】版權免責聲明

1、本主題所有言論和內容純屬會員個人意見，與本論壇立場無關。2、本站對所發內容真實性、客觀性、可用性不做任何保證也不負任何責任，網友之間僅出于學習目的進行交流。3、對提供的數字內容不擁有任何權利，其版權歸原著者擁有。請勿將該數字內容進行商業交易、轉載等行為，該內容只為學習所提供，使用后發生的一切問題與本站無關。 4、本網站不保證本站提供的下載資源的準確性、安全性和完整性;同時本網站也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的損失或傷害。 5、本網站所有軟件和資料均為網友推薦收集整理而來，僅供學習用途使用，請務必下載后兩小時內刪除，禁止商用。6、如有侵犯你版權的，請及時聯系我們（電子郵箱1370723259@qq.com）指出，本站將立即改正。