1.jpg (52.04 KB)
下載附件
2021-12-21 02:14 上傳
安裝文件下載:
百度網盤下載鏈接.txt
(754 Bytes, 售價: 100 E幣)
2022-9-23 01:27 上傳
點擊文件名下載附件
售價: 100 E幣 [記錄]
[ 購買]
注意:請確保您所用的網絡可以訪問百度網盤并能熟練使用百度網盤下載文件,若附件內下載鏈接失效不能下載,可以回復本文留下郵箱給您發送可用鏈接。
Software requirements
The following operating systems are supported:
● MS Windows XP SP2 or SP3
● MS Windows Server 2003 SP1 or SP2 with or without R2
● MS Windows Server 2008 Standard Edition as workstation computer (32-bit)
● MS Windows 7 32-bit & 64-bit Professional, Ultimate & Enterprise with or without SP1
● MS Windows Server 2008 R2 as workstation computer with or without SP1
You have to install the following software packages to operate Safety Matrix V6.2 SP2:
● For Safety Matrix Engineering Tool V6.2 SP2
? S7 F Systems V5.2 SP1 or higher
? F-library Fail-safe Blocks (V1_2) or S7 F Systems Lib V1_3
? For offline testing: S7?PLCSIM, depending on the installed S7 F System version
? Automation License Manager (ALM) as of V5.3
For use with PCS 7 *)
? PCS 7 as of V7.0 SP3
For use without PCS 7 *)
? STEP 7 as of V5.4 SP3 HF7
? CFC as of V7.0 SP1 HF8
*) Note the restrictions onCFC versions in the readme for Safety Matrix Engineering Tool section 3.1 "Notes on the add-on package"
● For Safety Matrix Viewer V6.2 SP2
PCS 7 as of V7.0 SP3
● For Safety Matrix Editor V6.2 SP2
Windows versions as listed above
● For Safety Matrix AS-OS-Engineering V6.2 SP2
PCS 7 as of V7.0 SP3
Available installation units
Safety Matrix consists of the following installation units:
● Safety Matrix Engineering Tool V6.2 SP2
Configuration, library, compiling, loading, operating and monitoring of safety matrices using STEP 7 SIMATIC Manager on a PCS 7 or STEP 7 engineering system (ES)
● Safety Matrix Viewer V6.2 SP2
Block icons and faceplates for Safety Matrix in PCS 7 OS
● Safety Matrix Editor V6.2 SP2
Configuring safety matrices on PC outside PCS 7 or STEP 7
● Safety Matrix AS-OS-Engineering V6.2 SP2
Compiling PCS 7 OS with safety matrices in a PCS 7 project
【必讀】版權免責聲明
1、本主題所有言論和內容純屬會員個人意見,與本論壇立場無關。2、本站對所發內容真實性、客觀性、可用性不做任何保證也不負任何責任,網友之間僅出于學習目的進行交流。3、對提供的數字內容不擁有任何權利,其版權歸原著者擁有。請勿將該數字內容進行商業交易、轉載等行為,該內容只為學習所提供,使用后發生的一切問題與本站無關。 4、本網站不保證本站提供的下載資源的準確性、安全性和完整性;同時本網站也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的損失或傷害。 5、本網站所有軟件和資料均為網友推薦收集整理而來,僅供學習用途使用,請務必下載后兩小時內刪除,禁止商用。6、如有侵犯你版權的,請及時聯系我們(電子郵箱1370723259@qq.com)指出,本站將立即改正。
|